App
Cadence Dial 2
개발자 GDCSoft · v0.0.56
평점
5.0
리뷰
2
다운로드
1,000
가격
유료
설명
An attractive dial display for your cadence. Upgrade to add full configurability of the dial range, zones used, a highlighted goal, all colours and detailed statistics so that you can review your performance and improve your training. You must have a cadence sensor for your Garmin to see cadence values. Purchase a code for this product here: https://www.gdcsoft.com/k/G/CadDial2s Instructions: https://www.gdcsoft.com/garmin/help/datafield 1. SPECIFYING ZONES Specify zones using a comma separated list of data values. Values are sorted by size. The smallest value becomes the base of zone 1 with each subsequent value forming the boundary with the next zone. If you specify more than 5 zones, the list will be truncated. Lists are sorted by size during processing. 2. SPECIFYING DIAL RANGE Dial range affects only the visual display. If you do not set a range, the dial will calculate an appropriate range for display. A single value list is interpreted as a range from zero up to that value. If you specify more than one value, the dial will range from the smallest value up to the highest value. Dial range supports: • Zone values • Data values • A mix of zone and data values 3. SPECIFYING TARGET RANGE A single value list is interpreted as a range from that value up to the dial maximum. If you specify more than one value, the target is the smallest value up to the highest value. Target range supports: • Zone values • Proportional values • Data values • A mix of zone, proportional and data values COMBINING VALUE TYPES Supported values for each range may be combined so that “z2,p0.75” specifies a range from the boundary of zone 2 to three-quarters of the way around the dial. Where a dial supports multiple units, values using different units may be used provided the unit is specified for each value. ZONE VALUES Zone values are specified as “z” and a zone number so that “z1” specifies zone 1 and “z5” specifies zone 5. Values may be combined so that “z1,z4” specifies the low boundary of zone 1 up to the high value of zone 4. PROPORTIONAL VALUES Proportional values are specified as “p” and a proportion around the dial between 0 and 1 so that “p0.25” specifies a quarter of the way around the dial. Values may be combined so that “p0.25,p0.5” specifies a range between a quarter and a half of the dial range. DATA VALUES Data values are specified in steps per minute for running or revs per minute for cycling. STATISTICS Zone and target statistics are stored on a per lap basis as well as for the entire session. Target range statistics allow you to track up to two values out of "below target", "on target" and "above target". Zone statistics allow you to track the percentage time in each configured zone. Zone and value graphs let you see the your progress through the session in Garmin Connect. FINALLY... If you encounter any problems or have any questions, please use the "Contact Developer" link and remember to include your email - I have no way to reply unless I have your email. If you find you love this dial, please give it a good review.
새로운 기능
https://twitter.com/GdcSoft | https://www.facebook.com/GDCSoft | https://www.reddit.com/user/GDCSoft | https://www.gdcsoft.com/garmin 0.0.56 : New devices 0.0.55a : Crash with updated settings 0.0.52,53,54,55 : New devices 0.0.50 : Descent g1 0.0.49 : Add in Instinct2 and move to Kiezel payment system. 0.0.48 : D2 AIR x10 0.0.47 : Epix 2nd Gen and Fenix 7 series 0.0.46 : Venu2 Plus 0.0.45 : Venu 2 / 2s 0.0.42 : Enduro. 0.0.41 : Eliminate potential div/zero error with trackRange. 0.0.39 : Fix partial screen layout with Fenix 0.0.38 : Eliminate potential problem with onSettingsChanged. 0.0.37 : Fix settings for singlesport, premium. 0.0.36 : D2 Air. 0.0.35 : Optimisations. 0.0.34 : Update URLs 0.0.33 : VenuSq 0.0.32 : FR745 0.0.31 : Revise all documentation. Optimize memory and code usage. Support for dynamic display of style changes in Edge. (Note: Configuration changes are only updated until you start an activity.) -- Ask me questions on Twitter https://twitter.com/GdcSoft or in this forum: https://forums.garmin.com/developer/connect-iq/f/showcase/223064/a-new-family-of-dials --- PRODUCT SUITE "TARGET DIALS" : Power Dial : https://apps.garmin.com/en-US/apps/19f101eb-d307-4589-a9c2-1644f078b892 Heartrate Dial 2 : (Singlesport) : https://apps.garmin.com/en-US/apps/80ea33b2-d582-4d21-b26b-6b1d829afe23 (Multisport) : https://apps.garmin.com/en-US/apps/c110c670-878c-41cb-a888-64c3b0e4632a Speedometer 2 : (Singlesport) : https://apps.garmin.com/en-US/apps/f2988bf4-04aa-4565-9abd-ce1a9664cd91 (Multisport) : https://apps.garmin.com/en-US/apps/e5083e40-8dc2-4bf2-9141-a215a0f3e09b Cadence Dial 2 : (Singlesport) : https://apps.garmin.com/en-US/apps/6ea149d4-b9f2-48de-bd86-cf0cd1fd27d9 (Multisport) : https://apps.garmin.com/en-US/apps/bdd9473a-1611-484b-9d62-e6af68e7e117 Run Dial : https://apps.garmin.com/en-US/apps/bf4bb389-a8b8-4d52-af12-cd04a1604f1f Burn Gauge 2 : https://apps.garmin.com/en-US/apps/ca6b8b4a-1d58-4bc2-a8a6-4a74965ceba7
리뷰
리뷰 기사가 곧 게시됩니다.