Data Field
Pedaldeck - all-in-one cycling field
Por ThijsGer · v1.0.3
Avaliação
5.0
Avaliações
1
downloads
100
Preço
Grátis
Descrição
Pedaldeck is one cycling data field for Edge and watch that fills any slot on your data screen with the numbers you pick. In a full screen it is a dashboard of up to 11 values plus a speed graph coloured by heart-rate zone; in half a screen it shows your top four; in a quarter two; in the smallest slot, such as the 10-field Edge page, one. Every row is fitted with the largest text that fits, so nothing is cut off. Choose a preset (Endurance, Intervals, Race / time trial, Climb, Training load) or set every slot yourself in the Connect IQ app. It works without any setup. No power meter? Pedaldeck estimates virtual power from your speed, the grade, your weight, bike weight, air density and your riding position (CdA and rolling resistance can be set). With a power meter it uses the real numbers. From there it shows 3 s power with a zone bar, W/kg, normalized power, intensity factor, TSS and kJ, and compares each lap with the last three. A climb meter picks up climbs by itself and shows height gained, average grade and length, next to grade and VAM. Speed is smoothed with a Kalman filter, so GPS noise is damped but a sprint shows within seconds. Power, grade, NP, TSS and lap power are saved to the FIT file. WHAT IT DOES - 48 values to choose from: power (3 s), W/kg, average power, NP, IF, TSS, kJ, power zone, lap power and the last three laps, lap power versus last lap, max power, cadence, grade, VAM, climb height / grade / distance, speed, heart rate, HR zone, %HRmax or %HR reserve, distance, timer, lap values, time of day, battery, ascent, altitude, calories and more - Presets Endurance / Intervals / Race / Climb / Training load, or your own order in 12 slots (slot 1 is the most important) - Virtual power for riders without a power meter, or the power meter when one is paired - FTP from your Garmin profile (newer devices) or set by hand; power zones in the Garmin Connect colours - Kalman-smoothed speed with adjustable smoothing - Alerts (vibration, tone and pop-up) when power stays above a chosen % of FTP or HR goes above a chosen zone, with a cool-down - Automatic, dark, light and high-contrast colours; five languages - Power, grade, NP, TSS and lap power saved to the FIT file WHAT IT NEEDS - GPS or a speed sensor for speed; a barometric altimeter for grade, VAM, climbs and virtual power; a power meter for measured power; a cadence sensor for cadence - Older watches with little memory show a smaller set: power meter values, W/kg, NP and cadence, but no virtual power, climbs or lap comparison - Settings in the Connect IQ app (preset, slots, FTP, weights, CdA, rolling resistance, alerts) - How to add: start a ride, open Settings / Data Screens, pick a screen and a field, then choose Connect IQ / Pedaldeck. Then press BACK until you see the activity screen and scroll to that page. Until you press START it shows dashes (--). Tip: a 1-field layout gives the full dashboard
Novidades
Adds support for Enduro 4 and MARQ (Gen 3).
Análise
Artigo de análise em breve.