Data Field
TubeWitch for Tubolito SYNCD
Von BB-BB · vTW_BLE_1.00
Bewertung
5.0
Bewertungen
3
Downloads
10
Preis
Kostenlos
Beschreibung
TubeWitch for Tubolito SYNCD is a FREE Garmin Data Field that brings Tubolito SYNCD Bluetooth tire-pressure data to compatible Garmin Edge devices and watches. It offers extensive customization, flexible display and label options, configurable low/high pressure targets, and audible, pop-up, and vibration pressure alerts designed to prevent nuisance duplicate alarms. TubeWitch passively receives SYNCD Bluetooth Low Energy broadcasts. No pairing is required. Troubleshooting: TubeWitch.com/Tubolito **** ALERT: SAVING SETTINGS WITH THE CONNECT IQ MOBILE APP IS AFFECTED BY A BUG IN THE GARMIN IQ SYSTEM. MAKE SURE THE TUBEWITCH DATA FIELD IS VISIBLE ON YOUR GARMIN DEVICE WHEN CHANGING SETTINGS. IF SETTINGS STILL DO NOT SAVE, TRY USING GARMIN EXPRESS. **** Required: Use the Garmin Connect IQ mobile app or Garmin Express to enter Tubolito SYNCD sensor names and pressure targets in the TubeWitch settings. See screenshots and tips below. Tips: ● Install TubeWitch, then reboot your Garmin device and restart the Garmin Connect IQ mobile app. ● On your Garmin device, add the TubeWitch Data Field to a data screen and LEAVE IT VISIBLE. ● In the Connect IQ mobile app, open TubeWitch settings and enter each complete Tubolito SYNCD sensor name, such as SYNCD-C3D0. Find the sensor name in the Tubolito SYNCD mobile app. ● Do not enter the Bluetooth address. ● Enter the Low and High pressure target values in your selected pressure unit. ( PSI, kPa, or BAR) ● Tubolito SYNCD provides data less frequently than ANT+ sensors, so pressure updates less frequent. Allow several minutes for initial data after setup or after the data field restarts. ● Do not pair the Tubolito SYNCD sensor with the Garmin. TubeWitch reads the sensor’s advertised Bluetooth data with no native pairing needed. ● **** When changing settings with the Connect IQ app, TubeWitch MUST BE VISIBLE on your Garmin. ● **** Try using Garmin Express if the Connect IQ mobile app fails to save settings. **** FAQs: ● What Tubolito products are supported? TubeWitch currently supports Tubolito SYNCD & PSENS Bluetooth tire-pressure sensors. ● Is it accurate? Yes, TubeWitch displays the same pressure as shown in the Tubolito mobile app. ● Why is a “?” shown next to pressure? The displayed reading is retained but stale because TubeWitch has not received a recent sensor broadcast. ● Why is an “X” shown next to pressure? During an activity, TubeWitch reached its configured Sensor Timeout and stopped searching for that position to conserve battery. Touch the data field to rescan on supported touch devices. ● Will it work with more than two sensors? Yes. Save up to five named bikes or wheel sets. Manually select the active sensor set, choose Auto to scan configured sets, or use Touch to Switch. Only one sensor set is displayed at a time. ● Can I mix and match Tubolito SYNCD and TyreWiz sensors. Yes, but you would need both versions of TubeWitch installed. Each brand of sensor would be contained to their own respective data field. ● Will it record tire-pressure data to the Garmin activity? Yes, when enabled in TubeWitch settings. ● What does TubeWitch add? Flexible layouts, labels, colors, per-sensor low/high targets, configurable alerts, stale-data indicators, FIT recording, five sensor sets, and more. Search terms: TubeWitch, Tube Witch, Tubolito, Tubolito SYNCD, Tubo-Road SYNCD, SYNCD, PSENS, Bluetooth, Bluetooth LE, BLE, tire pressure, tyre pressure, TPMS, smart tube TubeWitch is an independent third-party Garmin Connect IQ data field and is not affiliated with, endorsed by, or sponsored by Garmin or Tubolito. All trademarks are the property of their respective owners.
Neuigkeiten
Version 1.00 – Initial release If upgrading from an earlier TubeWitch Tubolito SYNCD release, your existing settings are retained. Reboot your Garmin device and restart the Garmin Connect IQ mobile app to complete the update. SETTINGS: ACTIVE SENSOR SET ● Choose which Sensor Set is shown in the Data Field. Manually select the active set or use Auto to scan configured sets every 10 seconds. If you only have one set, Auto is not recommended. Tubolito SYNCD broadcasts can be less frequent, so Auto may require multiple scan cycles. SENSOR SET #1–5 ● Sensor Set Name – Shown in Connect IQ stats when activity recording is enabled. ● Enabled Sensors – Front, Rear, or both. ● Front and Rear Sensor IDs – Enter the complete Tubolito SYNCD sensor name, such as SYNCD-C3D0. Find the sensor name in the Tubolito SYNCD mobile app. Do not enter the Bluetooth address. ● Front and Rear Low Target / High Target – Optional pressure-alert limits in the selected unit of measure. A value of 0 disables that individual limit. UNIT OF MEASURE DISPLAY ● Unit of Measure – PSI, kPa, or BAR. Garmin reboot required. After changing, update your sensor pressure targets to reflect the correct value in the new unit of measure. ● Decimal Places – Number of digits to the right of the decimal. This can cause labels to be truncated. ● Show Unit of Measure. SENSOR LABELS ● Show Front/Rear Labels in the Data Field. ● Show Sensor IDs in the Data Field. ● Show Sensor Set Name in the Data Field. ● Label Delimiter used on horizontal layouts. DISPLAY ● Display Style Mode – TubeWitch Mode is the default. Compatibility Mode uses dynamic sizing and positioning for supported device layouts. ● Layout Orientation – Auto, Vertical, or Horizontal. ● Background Color – Auto, Light, or Dark. TOUCH SETTINGS ● On supported touch-screen devices, tapping the field can switch Sensor Sets, disable TubeWitch, rescan after timeout, or stop remaining alarm repeats. SENSOR TIMEOUT ● Timeout in Minutes – Default 15 minutes. During an activity, TubeWitch times out if no sensor data is found. It does not time out when an activity is not started. AUTO SWITCH SCAN DELAY ● Delay in Seconds – Default 60 seconds. If both sensors disconnect while Active Sensor Set = Auto, TubeWitch waits for this delay before scanning other configured sets for 10 seconds each. HIGH/LOW PRESSURE ALARMS ● Tubolito SYNCD broadcasts pressure data; TubeWitch uses your configured Low/High Targets to determine alerts. ● Audible Alert – Not available on all watches. ● Pop-Up Alert – Newer devices only. ● Vibration Alert – Watches only. ● Set how many seconds a tire must be Low or High before triggering an alarm. ● Set how many seconds pressure must be within target before resetting an alarm. ● Set additional alarm repeats, 90 seconds apart. ● Choose audible alarm tone and Data Field alarm box/font color. Color changes are always active and immediate. ACTIVITY RECORDINGS Garmin reboot required after changing recording settings. ● Record Pressure. ● Record Pressure Alarm Status. ● Record Pressure Stale Data Indicator. ● Record Sensor Set # Used. More Info: TubeWitch.com/Tubolito
Bewertung
Bewertungsartikel kommt bald.