App
Power+
By FC7 · v8.21
Rating
4.8
Reviews
31
downloads
10,000
Price
Free
Description
Inspired in Dr.Maumi 'Speed+Avg.' this app shows the current and average power in the same data field. If configured in a full width field it can also display both average and maximum or normalized power plus power zones, percentage of FTP and total time in power zones (time in power zone is not available on Edge 130 devices). Highly customizable. By default 3s power will be displayed as current power but it can be configured to display instant or 10s power instead. You can use colors to highlight high/low power values compared against the average power +/- a configurable tolerance or highlight current power value using colors according to the current power zone. Up/down arrow indicators can also be enabled to quickly and visually indicate if current power is above or below the average power +/- a configurable tolerance. If using a half-width field you can configure if you want the datafield to display the value for average, maximum or normalized power along the current value or even alternate both every 5 seconds. In this case average value will be displayed in blue, maximum in purple and normalized power in orange. Lap support: when lap support option is enabled the average, maximum, normalized power and time in zone values will be reset on every lap, or in workout mode when a workout step is completed, and you will visualize the current lap values. Additionally the data field can be configured to exclude zero values (disabled by default). Indicators: [1], [3], [10] or [30]: indicates current power averaging mode in seconds ([1] means no averaging is applied) [A], [M], [N] or [T] (half-width fields only): indicates if the displayed value along the current one corresponds to the average, the maximum or the normalized power or if the values are alternating in colors every 5 seconds (avg = blue, max = purple, np=orange). [L]: indicates that lap information is displayed instead of activity totals You can find all my apps here: https://apps.garmin.com/en-US/developer/aa709361-9b93-48f0-b4df-ace7894a754b/apps For full version history and further details please visit: https://www.fercasas.com/garmin-connect-iq/power-plus/ Disclaimer: the datafield does not calculate power on its own. A power meter compatible with your Garmin Edge device is required to measure power values. Minimum Connect IQ version required 2.4.0. Note: normalized power needs at least 30 seconds of samples to be calculated so for the first 30 seconds of the activity normalized power will show a value of 0w.
What's New
All feedback is welcome and please don't hesitate to report any problems or translation issues using the Contact Developer link in the App Info tab, on the Additional Details section. Make sure you include your email address so I can reply to your message. Please note that all my applications are free as in free beer so you are not required to donate to use any of my apps. Donations to support my work will naturally still be much appreciated: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=7W865UNMWYUR6 Version 8.21: Refresh for Edge 540/840 with firmware 20.19 or newer. Version 8.20: Added support for Edge 540/840. Version 8.10: Added support for Edge 1040. Version 8.00: Added support (through user setting) for highlighting current power value using colors according to the current power zone. Set default highlight colors to dark variants for better contrast. Version 7.91: Extended the new setting to disable by default all color highlighting when the screen is in night mode. Version 7.90: Added a new setting to disable by default power highlighting when the screen is in night mode. Version 7.81: Edge 530/830 layout update. Version 7.80: Edge 130 bug fixes. Added support for Edge 130+ and Edge 1030+. Version 7.72: Edge 530/830 layout update. Version 7.71: Exclude zero values option is now disabled by default but it can be enabled in the datafield settings. Version 7.70: Exclude zero values option now applies to both, normal and lap mode. Version 7.60: Added support to discard zero values in lap mode. Version 7.50: Added support for lap values reset when in workout mode a workout step is completed. Version 7.40: Added support to alternate every 5 seconds the average, maximum or normalized power values using colors in half-width fields.
Review
Review article coming soon.