Data Field
Auto FTP Monitor - Real-time FTP & Stamina Monitor
개발자 kazuki_mc · v2.1.0
평점
3.0
리뷰
1
다운로드
100
가격
유료
설명
Automatically measures your FTP and stamina just by riding. No exhausting 20-minute ramp tests or manual FTP entry required. Auto FTP Monitor is a Garmin Edge app that continuously calculates your FTP and dynamically monitors real-time stamina. Works even without a power meter. Try it with an unlimited 7-day free trial. [Accuracy Notice - Please Read] - With a Power Meter Calculates based on actual readings from your sensor. - Without a Power Meter Estimates power using a physics model based on speed and gradient. Air resistance is compensated using live barometric pressure and temperature, though values may differ from actual power meter measurements. [Algorithm] - 3-Ride Moving Average Works from 0 seconds upon startup. On your first ride only, it generates a provisional FTP after 5 minutes of riding; from your second ride onward, it displays your estimated FTP immediately from the start. - All-Terrain Virtual Power Calculation Uses a gravity resistance model on climbs of 2% grade or steeper, and an aerodynamic drag model on flats and gentle slopes at 22 km/h or faster. Switches to 0W on descents and at low speeds, accurately reflecting stamina recovery. [Key Features] - Power Zone Bar Constantly displays a marker on the bar showing where your current power falls from L1 to L7. Features a wider layout for core training zones L3 to L5. Below the bar, zone boundaries calculated from your FTP are shown in watts. - Current Ride Power Graph Builds up from the left as you ride. The time axis scales automatically so your entire ride always fits on the screen, even on long rides. - Switchable Graph View Choose whether to display your current ride power trend or your historical FTP records. - Compact View for Split Screens When placed in a smaller field on a split data screen, it dynamically scales to display Estimated FTP, Current Zone, and 3s Power to fit the frame. - W-Prime Dynamic Stamina Monitor Displays remaining anaerobic energy capacity from 100% to 0%. Based on elapsed time and energy expenditure, the maximum stamina ceiling itself also decays realistically. - Automatic FTP Decay After 7 days without a ride, FTP decays by 0.5% per day up to a maximum of 20%. Set to OFF by default. - Additional Features Saves all-time peak FTP with a flashing new-record alert, shows delta vs. previous ride, offers selectable display modes, rider-type presets, and records data to Garmin Connect. [Premium Version] During the free trial, remaining days are shown in the top right corner. After the 7-day trial ends, a 5-digit code and QR code will appear on the screen. Scan the QR code or visit www.kzl.io/code and enter the code to unlock lifetime access via KiezelPay. [From the Developer] If you find this app helpful, please consider leaving a high rating and a 5-star review on the store. Your support is a huge encouragement for continued indie development.
새로운 기능
[Version 2.1.0] - Added remaining trial days to the top right corner during the trial period. On the final day, remaining hours are displayed. - Added a compact view so the layout stays clean when placed in a small field on a split data screen. Displays Estimated FTP, Current Zone, and 3s Power scaled to fit the frame. - Displays the payment URL and unlock code properly even when placed in a small field. - Added support for Edge 1030 Bontrager. - Cleaned up internal code and improved stability. [Version 2.0.3] - Fixed a minor bug. [Version 2.0.2] - Fixed a minor bug. [Version 2.0.1] - Fixed a minor bug. [Version 2.0.0] - Added a Power Zone bar. You can now see at a glance where your current power falls within L1–L7 via a marker on the bar. - Added a power trend graph for the current ride. It automatically scales so the entire ride fits on the screen, even on longer rides. - Added an option to switch the graph display in the settings (Current Ride Power / Past FTP Records). - The default graph display is set to "Current Ride Power". If you prefer the historical FTP records graph, please switch it in the settings. - Redesigned the overall screen layout. - Simplified the calibration display and moved it to the right of the estimated FTP. - Removed the power zone badge (e.g., L1 display) as it has been integrated into the Power Zone bar. [Version 1.1.3] - Fixed a minor bug. [Version 1.1.2] - Fixed a critical bug. [Version 1.1.1] - We have improved the accuracy of FTP and power estimation for users without a power meter. The air resistance calculation is now adjusted to account for atmospheric pressure (altitude) and temperature during your ride. (There is no change to the calculation method for users who use a power meter.) [Version 1.1.0] - Fixed a critical bug. [Version 1.0.6] - Fixed a minor bug. [Version 1.0.5] - Added FTP change vs. last ride and a 7-ride trend graph. - Fixed a critical bug. [Version 1.0.4] - Fixed a minor bug. [Version 1.0.3] - Added support for more device models. - Fixed a measurement bug. [Version 1.0.2] - Fixed a critical bug. [Version 1.0.1] - Fixed a minor bug. [Version 1.0.0 - Official Release] Officially released Auto FTP Monitor with a 7-day unlimited free trial. Main Features and Functions: - 0-second FTP startup system based on the moving average of the last 3 rides. - Provisional FTP generation after 5 minutes of riding, with a calculation engine optimized for flat terrain (22 km/h or faster) and gentle slopes. - Added history backup to restore from accidental data saves, and a function to delete the most recent entry. - Added permanent storage for lifetime peak FTP and automatic FTP decay settings. - Automatic calculation and display of W' dynamic stamina monitor and training zones (L1 to L7). - Integrated FIT file charts for ride analysis on Garmin Connect. - Optimized for the latest Garmin Edge series.
리뷰
리뷰 기사가 곧 게시됩니다.